Smok V-Fin Kit Review

Smok have announced yet another box mod, this time it appears to be a larger version of the popular H-Priv, featuring an internal battery.

It seems they are attempting to release a tweaked variant of every single device, to flood the market and cover every possible type of vaper.

The newest SMOK V-Fin Kit consists of V-Fin Mod and TFV12 Big Baby Prince Tank. It has a built-in battery with a whopping 8000mAh capacity, for some pretty long vaping times.

It has a maximum output power of up to 160W, with three modes for you to choose. Temp Mode, Watt Mode, and Memory Mode. There is a large fire button and high-definition OLED screen to show data such as VW/TC MODE, vaping effect, voltage, battery life and resistance value.

Airflow can be easily adjusted by turning the airflow control ring at the bottom of the tank. Top rotary refill makes filling simple with a leak-proof slot which can significantly reduce any leaking problems.

The Smok V-Fin Kit comes in 5 colours: Black Red, Silver Black, Black & 7 Color, White & 7 Color and Black Purple.

Specs & Features

V-Fin Mod Specs:

Size: 85mm(H) x 56mm (W) x 31.5mm (D)
Power Range: 6W-160W
Voltage Range: 0.5V-9.0V
Resistance Range:0.1ohm-3ohm(VW)/0.06ohm-3ohm(TC)
Temperature Range:200°F-600°F/100°C-315°C
TFV12 Big Baby Prince Tank:

Size: 55mm (H) * 28mm (D)
Capacity: 6ml
Material: Stainless Steel
Thread:510

SMOK V-Fin Kit with TFV12 Big Baby Prince Tank 160W comes with:

1x V-Fin Mod
1x TFV12 Big Baby Prince Tank
1x V8Baby-Q4 0.4ohm Coils(Pre-installed)
1x V8Baby-T8 0.15ohm Octuple Coils
1x Replacement Glass Tube
1x USB Cable
1x User Manual
Spare Parts

New Arrival:
Wismec Reuleaux RX Gen3 Dual Kit
Nikola Niagara Squonk 200w Kit
Vandyvape Pulse BF 80W Box Mod

Smoant Battlestar Mini 80W Mod review

This First Look is devoted to a new box mod from the Chinese company Smoant called Battlestar Mini.

At one time, the Battlestar boxer from Smoant made a lot of noise at the time of its release. Probably, only the lazy did not throw a stone in the garden of the producer in connection with the similarity of the device to everything known “Ryksu 2/3”. Indeed, the fact of copying was evident, however, Battlestar was still an independent device, although he repeated some elements of boxman design from Wismec. After a fairly long period of time, the Chinese from Smoant introduced a younger version and named it Smoant Battlestar Mini. Actually, it will be discussed today.

The novelty almost completely repeats the appearance of its ancestor. It is interesting that the manufacturer chose the same yellow color that many users liked in Battlestar 200W for their new device. Yeah, it looks pretty cute.

In addition to the bright yellow color solution, the Battlestar Mini is also available in classic black. It seems that the most popular version will still be the yellow version, and in time other interesting colors will appear. By the way, this time the guys from Smoant were inspired, apparently, by the boxer of eVic VTC Mini from Joyetech. In any case, the front panel of our today’s novelty looks suspiciously familiar.

Smoant Battlestar Mini Mod has very modest dimensions, but it is quite capable of accommodating atomizers with a diameter of up to 24mm. At least, so says the company-manufacturer. The maximum output power of 80W, of course, should be enough for the average vaaper, but the device will not last long in this mode.

The device operates from a single 18650 battery, which supplies the firm’s payment from the company Smoant. The built-in chip has many different functions that meet all modern requirements. Temperature control, TCR, VW and Bypass mode as usual on site. Particular pride in the manufacturer is a large OLED-display with a diagonal of 0.96 inches.
 Smoant Battlestar Mini
Specifications Smoant Battlestar Mini:

Dimensions: 37mm * 24mm * 81mm
Output Power: 80W
Supported resistors: 0.1Ω (VW, DVW, BYPASS), 0.05Ω (TC / TCR)
Power: One 18650 battery
0.96 inch OLED display
Operating modes: VW, DVW, BYPASS, TC (Ni / Ti / SS), TCR
USB charging
Colors: black, yellow

Best Recommend:
vape wholesale
SMOK TFV12 Prince
SMOK G-Priv 2
Smok ProColor 225w

Joyetech eVic Primo 2.0 with UNIMAX 2 Full Kit

The Joyetech eVic Primo 2.0 with UNIMAX 2 Full Kit is powered by dual replaceable 18650 cells. With a 228W maximum output, it is durable and reliable. It supports 2.0A quick charge capability with the new equalizing charging system. You can also use it as a power bank to charge your other electronic products with a RC (reverse charging) adapter. The Joyetech eVic Primo 2.0 with UNIMAX 2 Full Kit has upgradeable firmware and multiple fashionable features (including the real-time clock, custom logo and preheat). The UNIMAX 2 atomizer included in the kit adopts the exclusive TFTA-Tank system. With it you can do airflow control and e-liquid filling just by rotating or removing the top cap.

Joyetech eVic Primo 2.0

Parameters of Joyetech eVic Primo 2.0 MOD
Size: 53 x 26 x 84.0mm
Max charging current: 2.0A
Max output current: 50A
Output range: 1-228W
Output mode: VW/VT (Ni, Ti, SS316)/TCR/Smart/RTC/USB Charge mode
Features: quick charge/reverse charge/preheat/custom logo/real-time clock
Depth of 510 pins applicable: 4.0-5.5mm
Temperature control: 100-315°C/ 200-600°F
Resistance range: 0.05-1.5ohm under VT/TCR mode; 0.1-3.5ohm under VW mode
Battery using: dual married high-rate 18650 cells (continues discharge current 25A)
Colors: silver, black/silver, black/red, black/grey, bronze

Parameters of UNIMAX 2 Atomizer
Size: 25 x 53.5mm
E-liquid capacity: 5.0ml
Mouthpiece: UNIMAX 2 mouthpiece/510 mouthpiece
Applicable heads: BFL/BFXL coil heads; BF series heads (exclusive BF RBA/LVC/QCS) with BF adapter
Colors: Silver, Black

It comes with one eVic Primo 2.0 (no cell), one UNIMAX 2 atomizer, two BFL-1 (0.25ohm) head, one Spare glass tube, one QC USB cable, two Manual, one Warranty card, two Warning card and Spare parts. Notice that it doesn’t come with liquids or battery, you shall buy it separately. And It doesn’t include Reverse Charging Adapter. If you have interests in Joyetech eVic Primo 2.0 with UNIMAX 2 Full Kit, please go on Urvapin for more details.

Strong recommend:
buy electronic cigarette online
ijoy captain pd270
Shanlaan Laan Pod Kit
REV GTS MOD

Smok Stick X8 Kit Review

The electronic cigarette and part-time one of the best starter kits for beginner steamers Stick V8 has got an updated and improved version – Smok Stick X8 Kit.

The name of the set of Smok Stick X8 Kit was obtained thanks to the newest X-Baby cliniromizer included in the kit. The enema tank can hold up to 4 ml. liquid, allows you to fill the liquid with the “top” filling. You do not have to unscrew the cliromiser from the electronic cigarette to fill the liquid.

Thanks to the upper adjustable airflow, you can adjust the tightening force and the amount of steam produced. Thus, Smok xStick can be used both as a regular electronic cigarette and as a serious device for wicking.

Built-in 3000 mAh battery not only provides high autonomy, but also allows you to soar at a power of up to 80-100 W (when the battery is fully charged).

The battery charge level is indicated by an LED light bulb integrated into the “Fire” button. The USB cable allows you to charge the Smok Stick X8 Kit from a computer, laptop, outlet or from a cigarette lighter in the car.

The TFV8 X-Baby is powered by the same type of low-resistance replaceable evaporators. The kit includes two evaporators with a resistance of 0.25 ohms (pre-installed) and 0.13 ohms. Both evaporators perfectly convey and reveal the taste of the liquid, and also produce thick clouds of steam.

The tank of the clinicizer contains 4 ml of liquid and has an upper filling. The advantage of the TFV8 X-Baby is that it is an upper adjustable blower, due to which the tank leaks are completely eliminated.

SMOK Stick X8 Kit  
Smok Stick X8 Starter Kit Equipment:
Stick X8: 1 pc.
TFV8 X-Baby Clearing System: 1 pc.
Evaporator TFV8 X-Baby M2 (0.25 Ohm): 1 pc. (preinstalled)
Evaporator TFV8 X-Baby X4 (0.13 Ohm): 1 pc.
USB Cable
Silicone ring
Spare parts set
Instructions
 
 
Smok Stick X8 KitSpecifications:
Power: depends on the battery charge level.
Battery: 3000 mAh.
Voltage: 3.4-4.2 V.
Type of Evaporators: X-Baby
Tank capacity: 4 ml.
Blowout: upper
Refueling: top
Connector: 510
Size: 24×59 ml.

Best Seller:
electronic cigarette
vaporesso swag kit
Hangsen Genesis
smok priv one kit

Geekvape AEGIS Box Mod

Today I would like to tell you about the boxmode, which has no analogues at the moment. The main advantage of brutal Geekvape Aegis Mod from Geekvape is protection from water, dust, dirt, falls according to IP67 standards and MIL STD 810G-516.6.

Under the cut we will examine it from all sides, we will dip it in water and throw it. All interested are welcome.

Information for those who do not want to see reviews of electronic cigarettes in their own tape: in the upper right corner of the page click on “Settings”. Next, go to the “Display of materials” page. In the window that opens, mark “Electronic cigarettes” and click on the “save settings” button. After the done actions, you will no longer see unpleasant material.

Packaging

Supplied in a box of cardboard.

On the reverse side description and scratch code for checking originality.

The kit consists of: a boxman, instructions, o-rings, a cap for the usb port, screws and an adapter under 18650. There is also a version with a 26650 battery.

Appearance
Height – 88 mm
Width – 46.8 mm
Thickness – 37.8 mm
Weight – 202 grams

Available in four colors. Only the metal frame and the leather insert differ.

It is made of zinc alloy and aluminum. The first thing you pay attention to, after opening the box, is the smell of cheap Chinese shoes. On the first day he even interrupted the taste of the liquid. The build quality leaves much to be desired. There are superfluous cracks and inconsistencies of some decorative elements. The rubber insert on most of the device is just some kind of horror. She is constantly in mud and nap. Clean only happens in the first minutes after washing under running water. Looking at the promo photos on the Internet, I expected to get a three-hundred-foot brick, but in reality the mod was very convenient to use. In the hand lies like a poured. But that’s how it is too big for a single battery. However, for the sake of security, something must be sacrificed.

On the front side are:
The button “Fire”. The click is distinct, pleasant and not loud. The button itself sits tight and does not stagger.
0.96 “display.It is especially worth noting that in the off state it completely merges with the entire front glossy plastic panel.This is not often found.
The “±” buttons. But their click is heard from another room. Are located somehow very close to each other. Sometimes you can accidentally press both. Also not rattling.

On the back there is supposedly a leather insert with a stitching a la LG G4.

The name of the manufacturer is engraved on the side. Two torx screws hold the metal frame.

The opposite side is completely analogous to the previous one, only here is the engraving of the name of the device.

On top is a solid steel connector with a brass or gold-plated spring-loaded pin. It did not succeed in deforming it with various atoms. Connector platform can accommodate an atomizer, probably of any diameter.

Nearby is a microUSB-port for firmware device. It is covered with a silicone plug and a metal cover, which is fixed with two torx screws. Screwdriver in the set did not come up. Built-in charging is not. Although, with such a hemorrhoids access to the microUSB-port it is there to see it and would not want to.

At the bottom of the box, the battery compartment cover.

To extract it, you need to raise the lamb and, in fact, unscrew it.

On the inside of the lid there is an o-ring.

Threads of high quality. Problems with twisting / unwinding, as it happens in the modes with a similar solution, no.

Inside the compartment, mark the correct location of the battery.

Eats Aegis either from one battery 26650, or from 18650 with the help of a complete adapter.

Geekvape Aegis 100W TC Box Mod
Card Features
Power Rating: 100W
Max. Voltage: 9V ± 0.1V
Operating temperature range: -40 ° C to 80 ° C
Battery discharge up to 3.3V ± 0.1V
Thermal control on nickel, steel, titanium and TCR
Supported resistance range: Power and Bypass – 0.05 – 3 Ω / TC-NI – 0.05 – 0.8 Ω / TC-SS – 0.05 – 1.65 Ω / TC-TI – 0.05 – 1.1 Ω
Temperature range in TC mode: 100 ° C – 300 ° C / 200 ° F – 600 ° F

Earlier I did not encounter boxmodes from Geekvape and the first acquaintance left a positive impression. I did not see any flaws in the quality of the work. According to the manufacturer, the delay is minuscule 0.015 seconds. Whether it triggers autosuggestion, whether the start of the roast is really instant. Unfortunately, the board does not have a wide range of options. Navigation in the menu is convenient. By pressing the “Fire” three times, the modes change, and once – change the parameters. From the third-party settings, only the brightness adjustment of the display is available and the “±” buttons are locked. And about the modes, of which 7, now briefly tell.

Power – varivatt. The screen displays power, battery indicator, resistance, current strength, voltage and number of puffs / time of the last tightening. In the varivatta device without problems copes with the winding of 0.09 Ohm. The resistance of the coil changes only during tightening. On DNA, for example, that in idle time, that at the moment of tightening, the actual resistance of the build is always displayed. You can lock it and reset it, after which the mod will fix the current resistance. Cut-off after 10 seconds.
TC-NI / TC-SS / TC-TI – Thermal control on nickel, steel and titanium. The same settings are available as in the previous mode. You can not adjust the TCR.
TCR – and here already the temperature coefficient is adjusted.
VPC – heating curve. Available 5 divisions in 1 second increments. During tightening, the point on the graph moves in accordance with the previously set power. The transition from one division to another is smooth.
Bypass – Mehmode mode. You can also lock and drop resistance.

Crash test

Geekvape Aegis Box mod, as you already read in the cap, is protected by the standards of MIL STD 810G-516.6 and IP67, which means resistance to short-term immersion in water, protection against ingress of dust into the body and painless drops from a small height without any consequences. The warranty does not cover internal failures due to the user’s fault, so do not disassemble it without special need. The network already has a huge variety of all kinds of bullying over this device. That in liquid nitrogen is dipped, then the machine moves. Honestly, it’s not that much and I want to sway in the trash of the modes, so I will limit myself to water procedures and falls at home.
Let’s start with the test with water. He put it for 20 minutes in the basin. This will be enough to check how it behaves in the rain, when falling in a puddle, a fountain or other not deep accumulations of water. The battery is inside, the device is turned on.

At the end of the bath we observe an unpleasant picture – the water got into the interior, but this did not affect the working capacity. In the battery compartment nothing stranger penetrated.

Analysis of Geekvape Aegis Mod occupation is not simple. The glossy panel is held on a double-sided tape. Fears were in vain – a drop of water accumulated on a protective plastic plate.

Go ahead. This plate is in turn fastened to a silicone sealant. It tore even harder. There are no traces of moisture on the board. It can be concluded that the presence of water under the front panel is not a verdict. The more often in attacks of paranoia will disassemble the mode after immersion in water, the higher the probability of depressurization of the shell.

After that, he dropped a dozen times, imitating the various situations in which this is possible. There are no deformations on the body of the tracks. Yes, laminate is not asphalt, but on the same crash tests from the network of deplorable consequences, too, was not.

Comparison of dimensions and fitting

Snowwolf 200C, Geekvape Aegis, LostVape Therion 166.

IJOY Combro RDTA II, VGOD RDTA RII, SMOK TFV8 Big Baby.

Geekvape Aegis 100W TC Box Mod
Conclusion
Pros:
Protection against falls, dust and water
Quality board
Brutal appearance in the compartment with comfortable ergonomics
Use with batteries 26650 and 18650
The solid connector. It is able to place almost any atoms on itself.

Minuses:
Not the most ideal assembly
Rubber inserts are instantly spoiled
Lack of charging through box-box
Water can still penetrate into the body

In the previous review from greed811 boxmode, after getting moisture, did not turn on. I did not have such a problem. Because we are dealing with the miracle of the Chinese industry and everyone is familiar with their floating manufacturing quality, do not put grandiose hopes that this device will survive 100%. A certain share of the probability of a lamentable outcome is still present. However, despite this, there are simply no alternatives to Aegis. With it, you can go fishing, hunting, dusty plant / garage, camping, and any other place without fear of dropping it into the water, dirt, on the asphalt or trite not to worry about the leaked liquid from the atom. We can only hope that the trend for the protected devices will be picked up by all manufacturers and this will be an integral part of each new product. Rusty is where. For example, to rid the microUSB port of a ton of stubs in the same way as in smartphones.
Thanks to all.

The Geekvape Aegis Mod is provided for writing a review by the store. The review was published in accordance with paragraph 18 of the Site Rules.

Best Seller:
buy electronic cigarette online
ijoy Genie PD270
Nicomore M1
smoant charon ts 218w

Geekvape Aegis Box Mod – The Details You Need To Know

Design & Appearance

The Geekvape Aegis box mod is designed by Justin, Geekvape GM, with the chief designer of Heatvape Invader mini. The Aegis is a tough and legendary TC box mod that has a cylindrical shape with a flat back and curved front thus it cannot roll off the position in which it was kept. It is a very portable product which is coated with leather and zinc alloy materials with a dimension of 8.80 x 4.50 x 3.50 cm and it weighs only 203 grams.

The top of this mod contains the 510 connector and venting holes while the flat back contains the fire button, function buttons, and display screen. This box mod can be comfortably held with your first two fingers, kept in your breast pocket and carried along through any distance as it weighs as much as an average smartphone. This product is currently available in brown and black colours.

Geekvape Aegis Box Mod
Hardware & Performance

The Geekvape Aegis 100W box mod is designed with one of the most advanced chips which feature a real rated power and instantaneous firing (0.015 seconds). It runs up to 100W with single 18650 or 26650 battery. It is the most robust vape mod with MIL STD 810G – 510.6 military grade proof and is robust thus you don’t have to worry about it getting scratched, soiled or broken by accident. The box mod is designed to be waterproof, shockproof and dustproof by adopting an advanced LSR injection molding technology. With IP67 waterproof/dustproof function, you are allowed to carry this device to the beach or go fishing, swimming, boating, kayaking, and any other water park activities. It is able to withstand a dirty environment and can be easily cleaned.

Workability

The Geekvape Aegis 100W box mod is designed to produce a maximum power of 100W, however, it has a power range between 5 – 100W. This product comes with a Temperature Control Function (TCF) which regulates the output temperature between 100 – 300 Deg.C. TCF function does miracles in enhancing e-juice flavor. Temperature control provides the choice of setting how hot you want the coils to be. It comes with a resistance of 0.1 – 3 ohms and a 510 thread.

Strong Recommend:
cheap vape deals
SMOANT Gaia
asvape michael mod
snowwolf vfeng

Kanger IKEN 230W Kit

Kanger IKEN kit has a large power of mod that comes with a built-in 5100 mAh battery and supports max 230W output power. It provides users perfect long-time vaping experience. The mod also featuring a 1.54 inch color TFT screen and show your vaping information directly. It is highly anti-vibrating, low power consuming and can stand with -40° temperature. It also has temperature control (NI/TI/SS/TCR) and DIY curve functions. In order to meet the needs of all vapers, the IKEN is designed with three modes of ability to choose from. You can choose the “Beginner” mode, the “Intermediate” mode or the “Expert” mode. That depends on your skills and knowledge. Each mode has several options that correspond to the selected skill level.

The Kanger Iken is equipped with a hefty 5,100 mAh integrated internal battery. This will allow the mod operate through the course of a day on a single charge, ensuring that you can enjoy your device without the risk of it depleting while you’re on the go. The permanent battery is advantageous, as it eliminates the need to purchase separate external batteries or a battery charger.
Kanger IKEN 230W Kit

The included tank features a top-shelf borosilicate glass tank, which houses the e-juice. It can hold 4ml liquid and has top filling design and “U” airflow technology. Unlike plastic reservoirs, the Kanger Iken is entirely impervious to the acidic composition of e-liquid. This is a very important distinction, as the deterioration of plastic tanks results in tainted flavor and a tarnished appearance, whereas the Kanger Iken will deliver a markedly cleaner, purer, and truer taste, while remaining aesthetically flawless. The glass is encompassed by a stainless steel shell, which helps protect it from accidental drops, while the large window enables you to monitor the remaining e-juice. The “U” airflow technique makes the airflow enters the chamber through two adjustable air inlets at the top, then down and wraps around the sides, forming a “U” shape. Apparently this design produces a more intense taste experience and a massive steam production. A feature further enhanced by the inclusion of a large diameter drip tip.
Kanger IKEN 230W Kit
The Kanger Iken kit is suitable for Beginner, Intermediate and Expert vapers. You will enjoy various and free flavor from this kit. Check out Urvapin so you can get the best deal on Kanger Iken.

Related Recommend:
buy electronic cigarette online
ijoy Genie PD270
Nicomore M1
smoant charon ts 218w

Wismec RX GEN3 Kit

Wismec RX GEN3 Kit is smaller, lighter, more ergonomic than previous versions, and includes the new GNOME Sub-Ohm Tank. The Reuleaux GEN3 device is capable of running up to 300W and has a full temperature control suite. A 1.3 inch OLED screen displays essential information to the user and a three button control face makes it easy to use. The Reuleaux GEN3 now features a slide and lock battery access door that accepts three high amperage 18650 batteries (sold separately) and has a maximum of 2A charging via a micro USB charge port. Included with the Wismec RX GEN3 Kit is Wismec’s new GNOME Sub-Ohm Tank, a 25mm, retractable sliding top fill tank. The GNOME Sub-Ohm Tank utilizes the Wismec WM Coil Family and includes a WM2 0.15 ohm coil and a WM3 0.2 ohm coil, capable of running 30 to 70W and 40 to 130W respectively. The GNOME Sub-Ohm Tank features a uniquely implemented, stealth dual bottom airflow control that is fully closeable and two proprietary drip tips–ULTEM and delrin.

Wismec RX GEN3 Kit

Features & Spec:
Size: 39.3*48.8*113.7mm
E-liquid Capacity: 2ml
Thread Type: 510 spring loaded connector
Cell Type: high-rate 18650 cell (discharging current should be above 25A)
Output Mode: VW/TC-Ni/TC-Ti/TC-SS/TCR mode
Output Wattage: 1-300W
Resistance Range: 0.05-1.5ohm for TC modes / 0.1-3.5ohm for VW mode
Temperature Range: 100-315°C/200-600°F (TC modes)
Maximum Charging Current: 2A
Maximum Output Current: 50A
Output Voltage Range: 0.5-9V

Package:
1 * Reuleaux RX GEN3 box mod (no cells)
1 * GNOME
1 * WM02 Dual 0.15ohm Head
1 * WM03 Triple 0.2ohm Head
1 * QC USB Cable
1 * Glass Tube
2 * User Manual
2 * Warning Card
Spare Parts

The Wismec RX GEN3 Kit with its smaller and lighter ergonomics and GNOME Sub-Ohm Tank is a top contender, alongside the other Reuleaux platforms on the market today! Are You interested on Wismec RX GEN3 Kit With Gnome from Wismec? Wait no more and enjoy of Wismec RX GEN3 Kit in your store Urvapin in just a few days.

Best Seller:
electronic cigarette
Wotofo Flow Subohm Tank
smok stick v8
tesla terminator

Sigelei Compak F1 40W Kit 2000mAh

The Sigelei Compak F1 Kit, the latest starter kit from Sigelei is a compact device that brings together tough, durable zinc alloy materials and a 2000 mAh battery so you can achieve high performance vaping with lower wattage output.
The Sigelei Compak F1 Kit features a 40W output, a 2ml tank capacity, LED indicators, e-liquid windows and a integrated battery with fast micro USB charging. The chassis is made from zinc alloy and a rubber-oil firing button/grip results in ideal ergonomics. An internal tank has a 2ml e-juice capacity, is easily refilled and its e-liquid level can be monitored via convenient viewing windows. The atomizer/tank are easily removed for replacement and are made with durable materials. There’s also a dust cap stored on the bottom of the kit for cleaning and to ensure maximum hygiene.
This Sigelei Compak F1 Kit is perfectly pocket-sized and an excellent addition to the low powered vaping category.

sigelei compak f1 kit

Features
Elegant design with different color options
Large firing button
Small durable shape with a comfortable feel
Rubber-oil material creates an ideal feel in your hand
Easy to view liquid through the 2 side windows
The atomizer can be easily removed which is very convenient and durable
The dust cap is stored under the device as a hygienic and clean tool

Parameters
Material:Zinc alloy
Wattage range:25W-40W
Working mode: Power mode
Battery capacity: 2000mAh(internal battery)
Resistance: 0.3Ω
Tank capacity:2.0ml
Charging support(USB):5V/2A

Package Included
1 * Compak F1 Mod
1 * Tank
1 * Replacement coil
1 * USB cable
1 * User manual
1 * Warranty card

This Urvapin. You can preorder one.

Best Recommend:
buy electronic cigarette online
ijoy Genie PD270
vapemen steam engine
justfog p16a

Sigelei Compak F1 Kit

The Sigelei Compak F1 Kit is an all-in-one setup features a 40W output, a 2ml tank capacity, LED indicators, e-liquid windows and an integrated battery with fast micro USB charging. This is a small, AIO vape setup that combines a durable zinc alloy chassis with a 2000 mAh battery for a top vaping performance in the lower wattage outputs.

With dimensions of just 28mm x 54.5mm x 90.50mm, this Sigelei Compak F1 Kit can be easily stored in a purse and is pocket friendly. Available colors for this kit include silver/black, red/black, white/black and all black. The chassis is made from zinc alloy and a rubber-oil firing button/grip results in ideal ergonomics. An internal tank has a 2ml e-juice capacity, is easily refilled and its e-liquid level can be monitored via convenient viewing windows. The atomizer/tank are easily removed for replacement and are made with durable materials. There’s also a dust cap stored on the bottom of the kit for cleaning and to ensure maximum hygiene.

An internal battery with a 2000mAh capacity for long vaping times powers the Compak F1. The built-in cell is recharged via a micro USB port that features a quick 2A current to quickly finish the charging process.

The Sigelei Compak F1 Kit works in power mode and has a maximum output of 40 watts, a maximum input voltage of 4.2 volts and fires with a resistance of 0.3ohm. An LED indicator light is used to monitor battery levels and also lights up during mod use.

Sigelei Compak F1 Kit
Features and Specifications
Measurements: 28mm x 54.5mm x 90.50mm
Made from zinc alloy
Rubber oil grip/fire button
Ergonomic and easily transported
Oversized fire button
Colors: white/black, black, red/black, silver/black
Dust cap to keep clean
Easy atomizer/tank replacement
Tank capacity: 2ml
E-liquid viewing windows
LED indicator light
Internal 2000mAh battery
Micro USB fast charging at 2A/5V
Operating modes: power
Power mode output range: 25W to 40W
Input voltage range: 3.2V to 4.2V
Replacement coil included
USB cable included
User manual
Warranty card

Great for on the go use or for the beginner vaper, this small sized, light weight Sigelei Compak F1 Kit is fantastic for traveling! Hurry up! Go on Urvapin to preorder one now!

Related Recommend:
buy electronic cigarette online
smok t priv
wismec rx gen3
SMOK Stick X8 Kit