Vladdin RE Review |REfillable and REliable Pod System

Intro

Vladdin came on to the vape scene not too long ago. Their pod vape was originally released as a closed system, but there’s recently been a change of plans. It now also takes refillable pods, utilizing a ceramic heating system for added longevity. The battery is 350 mAh and charges via micro-USB.

The Vladdin RE is designed for nic salts but can be used with regular e-juice as well. It has a lightweight and sleek design that makes it convenient for travel. I’ve tested a few pod systems with ceramic coils but was never completely satisfied. Let’s see what the Vladdin RE offers…

Price: $27.95 , Check it here Vladdin Device RE Full Kit

Colors: black, gold, rainbow, chrome

Specifications

  • Dimensions – 90.32 x 19.04 x 11.4 mm
  • Integrated 350 mAh rechargeable battery
  • Maximum wattage output: 12 W
  • Output voltage: 3.5 V
  • Coil resistance: 1.2-1.5 ohms
  • Coil material: ceramic coil
  • Refillable 1.5 mL pod juice capacity
  • Proprietary top-fill pods – silicone stopper
  • Magnetic connection
  • Drawing activated firing
  • LED battery indicator light
  • Micro USB port

Kit Content

  • Vladdin RE device
  • Vladdin RE replacement pod
  • Warning card
  • User manual
  • USB charging cable

Build quality & design

Vladdin RE

The Vladdin RE is extremely light. It weighs out to 20 grams, which is only 6 grams heavier than the JUUL! That’s impressive, especially considering it’s a bit taller and wider. The device has a futuristic curvy design with defined edges. Its ergonomic shape sits well in your fingers.

My Vladdin RE came with an elegent charcoal matte finish, but it comes in three other options including gold, rainbow and chrome. The overall construction is good. It doesn’t feel like a luxurious device, but maintains a nice balance between functional and stylish. It has an LED light that lights up when you vape but unfortunately there is no battery life indicator, one of its cons.

The refillable pods hold 1.5 mL of liquid, which is larger than most pod systems. The top cap comes off easily with a little squeeze to reveal a silicon plug. Once you remove the plug there are two fill holes, which work fine with unicorn bottles, but can get a little messy with droppers. When filling, be sure to use the side holes, not the chimney in the middle.

The pods snap into the battery using a gold-plated magnet. It doesn’t make an audible click, but it does make a strong connection. They have a narrow window for liquid level detection. The mouthpiece feels nice on the lips and stays on tightly. It’s time to fill it up and have a vape.

Performance

Vladdin RE
Classic black

The Vladdin RE gives off a tight mouth to lung vape comparable to the JUUL, but with a little more restrictiveness. You can barely get away with a restrictive lung hit on it. A white LED light illuminates as you puff and it’s draw-activated, so no buttons to get confused with. It produces a consistent puff up until the very end before it cuts off. If you’re going to use this as your main device, it makes sense to buy two batteries — one to charge while the other is in use.

The device offers a consistent vape — the pods always maintain a solid connection. It produces a pretty decent cloud too for its size. I’m really enjoying the flavor I get out of these ceramic coils. I tried it out with some 50 mg nic salt and it provided a great throat hit. I also tested it with some max-VG e-juice. It wasn’t as flavorful, but at least I didn’t get any dry or burnt hits. In my testing, it performed best with high-strength 50/50 blends, but it’s good to know it can handle pretty much any e-juice you can throw at it.

The pod capacity is good too, considering I get almost a day out of one refill. The battery doesn’t get me through a full day, but it charges in less than an hour. The cut-off time seems a bit shorter than I’m used to, but you aren’t going to be taking huge puffs with high-strength liquids anyway. With lower-strength e-juice, you are going to end up chain vaping on this thing.

I have been using the same pod for about a week now, and I haven’t noticed any drop off in flavor yet. It’s performing very strong for such a tiny device. The pods haven’t leaked either, aside from normal condensation. Aside from that, there has been no gurgling or spitback at all.

Vladdin Device RE kit
Chrome

Pros / Cons

  • Consistent performance
  • No dry hits or leaking
  • True MTL draw
  • Lightweight and ergonomic
  • Micro USB charging
  • 1.5 mL pod capacity
  • No battery life indication
  • Battery doesn’t last a full day
  • Not ideal for dropper bottles

Verdict

Overall, the Vladdin RE was dependable. You don’t need to do any tricks or hacks to get it to hit properly. It just works, every time. I wasn’t expecting much from this little thing, but I have to say I’m quite impressed. It’s definitely worth the price for a solid refillable pod system.

I wish the battery had a larger capacity with some kind of battery life indication. But I still get a more consistent vape with the Vladdin than a lot of similar devices in its price range. I’d recommend it to a smoker who’s serious about making the switch or fans of refillable pod systems. What do you think about the Vladdin RE? Leave a comment and share your thoughts.

Come to check it out: Vladdin Device RE Full Kit

Related product:
Nikola Delorean Pod Kit
Voopoo ROTA Pod System Kit 340mAh
Joyetech ATOPACK Magic Pod System Kit 1300mAh
VGOD STIG Disposable Pod Device 3pcs

Related Articles:
Aspire Speeder Revvo Kit Review – Speed Vaper
GeekVape Ammit MTL RDA review
Freemax Scylla Review – With Ceramic Coil Technology

Snowwolf Vfeng Squonk Kit Review

Snowwolf has recently brought out some surprisingly detailed mods like the like the Snowwolf XFeng 230 and the elegant Snowwolf 200W-R. They are now making their first trip into the squonking arena with something more than just swapping a battery for a squonk bottle.

The Snowwolf VFeng Squonk Kit is essentially the instantly recognizable design and chunky VFeng S, but instead of two batteries, they have two… Yes, two! Squonk bottles. Which means you can swap flavors or mix flavors, are we about to see the beginning of the squonktail!

The VFeng keeps the 1.3in TFT color screen which looks clear and bright, and you can use the full suite of batteries from 18650 with an adaptor to the 20700 and 21700. Max power depending on your chosen battery is 120W.

You get the safety of a regulated mod with variable wattage and Temperature control. The full kit gets you a 27.3mm Snowwolf RDA with adjustable airflow and as you might have guessed bottom feed pin.

The Snowwolf VFeng Squonk comes in Red, Black, and Blue.

Specs & Features

Snowwolf VFeng Squonk Mod Specs:

Size: 48.5x39x95mm
Squonk bottle capacity: 3mlx2 (6ml in total)
Display: 1.3inch TFT colour screen
Wattage range: 10.0W-120W
Temperature range: 100℃~300℃/212℉~572℉
Voltage input: 3.2V~4.2V
Voltage output: 1.0V-7.5V
Battery support: 1×21700 /1×20700 /1×18650 (should be used with adaptor)
Modes: POWER/Ti1/Ni200/304/316/317
Resistance range: 0.05Ω-3.00Ω
Coil supporting: Kanthal/Titanium/Ni200/SS(304/316/317)TCR(DIY)
Charging support (Micro USB): DC 5V/2A
Dual squonk bottles to mix flavours or easily change over
Main material: Zinc alloy
Colours available: Blue, Black and Red

Snowwolf Squonk RDA Specs:

Size: 27.3×41.4mm
Material: Stainless steel and Aluminium
Airflow adjustment

Kit Contents:

Snowwolf Vfeng Squonk BF Kit
Snowwolf RDA tank
User Manual

Urvapin’s Esater Sale is coming,10% off with coupon code:Easter,just cheack the link: https://www.urvapin.com/easter

Strong Recommend:
Smoant S8 Pod Starter Kit
Vaporesso ORCA Solo Kit

Pre Order ! Hugo Vapor Squeezer BF Squonker Kit

Hugo Vapor Squeezer Mod is the brand new Squonker Mod. Featuring the Lockable Fire Switch, New Nylon and Fiber Material, it is so intelligent to prevent the accidental auto-fire. The Squonk Mechanical Mod compatible single 18650 and 20700 battery that 510 mode works safely with all kind of tanks. With the built-in 10ml food grade silicone bottle, it is the powerful easy BF mod for your RDA.

Hugo Vapor Squeezer BF Mod is compatible with both 18650 and 20700 battery(not included). Comes with the advanced material of Nylon construction & fiber and the built-in 10ml food grade silicone bottle. Together with lockable fire switch preventing accidental auto-fire, avoids potential danger.
Hugo Vapor Squeezer BF Squonker Kit
Hugo Vapor Squeezer BF Squonker Kit Features and Specs:
Compatible with both 18650 and 20700 battery
Built-in 10ml food grade silicone bottle
Battery Type: 1 * 18650 or 1 * 20700
Capacity: 10ml
Connection: Gold plating pin
Conductive Plate: Special Brass with Silver Plating
Material: Nylon fiber

Hugo Vapor Squeezer BF Squonker Kit Package Includes:
1 * Squeezer BF Mod(18650/20700)(Batteries not included)
1 * Squeezer BF RDA
1 * 10ml Silicone Bottle
1 * 18650 Adaptor Tube
1 * 30ml Filling Bottle
1 * Manual

Best Seller:
cheap vape deals
IJOY Captain X3 KIT
IJOY Captain X3 Box Mod
SMOK Majesty kit

Joyetech eVic Primo 2.0 with UNIMAX 2 Full Kit

The Joyetech eVic Primo 2.0 with UNIMAX 2 Full Kit is powered by dual replaceable 18650 cells. With a 228W maximum output, it is durable and reliable. It supports 2.0A quick charge capability with the new equalizing charging system. You can also use it as a power bank to charge your other electronic products with a RC (reverse charging) adapter. The Joyetech eVic Primo 2.0 with UNIMAX 2 Full Kit has upgradeable firmware and multiple fashionable features (including the real-time clock, custom logo and preheat). The UNIMAX 2 atomizer included in the kit adopts the exclusive TFTA-Tank system. With it you can do airflow control and e-liquid filling just by rotating or removing the top cap.

Joyetech eVic Primo 2.0

Parameters of Joyetech eVic Primo 2.0 MOD
Size: 53 x 26 x 84.0mm
Max charging current: 2.0A
Max output current: 50A
Output range: 1-228W
Output mode: VW/VT (Ni, Ti, SS316)/TCR/Smart/RTC/USB Charge mode
Features: quick charge/reverse charge/preheat/custom logo/real-time clock
Depth of 510 pins applicable: 4.0-5.5mm
Temperature control: 100-315°C/ 200-600°F
Resistance range: 0.05-1.5ohm under VT/TCR mode; 0.1-3.5ohm under VW mode
Battery using: dual married high-rate 18650 cells (continues discharge current 25A)
Colors: silver, black/silver, black/red, black/grey, bronze

Parameters of UNIMAX 2 Atomizer
Size: 25 x 53.5mm
E-liquid capacity: 5.0ml
Mouthpiece: UNIMAX 2 mouthpiece/510 mouthpiece
Applicable heads: BFL/BFXL coil heads; BF series heads (exclusive BF RBA/LVC/QCS) with BF adapter
Colors: Silver, Black

It comes with one eVic Primo 2.0 (no cell), one UNIMAX 2 atomizer, two BFL-1 (0.25ohm) head, one Spare glass tube, one QC USB cable, two Manual, one Warranty card, two Warning card and Spare parts. Notice that it doesn’t come with liquids or battery, you shall buy it separately. And It doesn’t include Reverse Charging Adapter. If you have interests in Joyetech eVic Primo 2.0 with UNIMAX 2 Full Kit, please go on Urvapin for more details.

Strong recommend:
buy electronic cigarette online
ijoy captain pd270
Shanlaan Laan Pod Kit
REV GTS MOD

Smok Stick X8 Kit Review

The electronic cigarette and part-time one of the best starter kits for beginner steamers Stick V8 has got an updated and improved version – Smok Stick X8 Kit.

The name of the set of Smok Stick X8 Kit was obtained thanks to the newest X-Baby cliniromizer included in the kit. The enema tank can hold up to 4 ml. liquid, allows you to fill the liquid with the “top” filling. You do not have to unscrew the cliromiser from the electronic cigarette to fill the liquid.

Thanks to the upper adjustable airflow, you can adjust the tightening force and the amount of steam produced. Thus, Smok xStick can be used both as a regular electronic cigarette and as a serious device for wicking.

Built-in 3000 mAh battery not only provides high autonomy, but also allows you to soar at a power of up to 80-100 W (when the battery is fully charged).

The battery charge level is indicated by an LED light bulb integrated into the “Fire” button. The USB cable allows you to charge the Smok Stick X8 Kit from a computer, laptop, outlet or from a cigarette lighter in the car.

The TFV8 X-Baby is powered by the same type of low-resistance replaceable evaporators. The kit includes two evaporators with a resistance of 0.25 ohms (pre-installed) and 0.13 ohms. Both evaporators perfectly convey and reveal the taste of the liquid, and also produce thick clouds of steam.

The tank of the clinicizer contains 4 ml of liquid and has an upper filling. The advantage of the TFV8 X-Baby is that it is an upper adjustable blower, due to which the tank leaks are completely eliminated.

SMOK Stick X8 Kit  
Smok Stick X8 Starter Kit Equipment:
Stick X8: 1 pc.
TFV8 X-Baby Clearing System: 1 pc.
Evaporator TFV8 X-Baby M2 (0.25 Ohm): 1 pc. (preinstalled)
Evaporator TFV8 X-Baby X4 (0.13 Ohm): 1 pc.
USB Cable
Silicone ring
Spare parts set
Instructions
 
 
Smok Stick X8 KitSpecifications:
Power: depends on the battery charge level.
Battery: 3000 mAh.
Voltage: 3.4-4.2 V.
Type of Evaporators: X-Baby
Tank capacity: 4 ml.
Blowout: upper
Refueling: top
Connector: 510
Size: 24×59 ml.

Best Seller:
electronic cigarette
vaporesso swag kit
Hangsen Genesis
smok priv one kit

Geekvape AEGIS Box Mod

Today I would like to tell you about the boxmode, which has no analogues at the moment. The main advantage of brutal Geekvape Aegis Mod from Geekvape is protection from water, dust, dirt, falls according to IP67 standards and MIL STD 810G-516.6.

Under the cut we will examine it from all sides, we will dip it in water and throw it. All interested are welcome.

Information for those who do not want to see reviews of electronic cigarettes in their own tape: in the upper right corner of the page click on “Settings”. Next, go to the “Display of materials” page. In the window that opens, mark “Electronic cigarettes” and click on the “save settings” button. After the done actions, you will no longer see unpleasant material.

Packaging

Supplied in a box of cardboard.

On the reverse side description and scratch code for checking originality.

The kit consists of: a boxman, instructions, o-rings, a cap for the usb port, screws and an adapter under 18650. There is also a version with a 26650 battery.

Appearance
Height – 88 mm
Width – 46.8 mm
Thickness – 37.8 mm
Weight – 202 grams

Available in four colors. Only the metal frame and the leather insert differ.

It is made of zinc alloy and aluminum. The first thing you pay attention to, after opening the box, is the smell of cheap Chinese shoes. On the first day he even interrupted the taste of the liquid. The build quality leaves much to be desired. There are superfluous cracks and inconsistencies of some decorative elements. The rubber insert on most of the device is just some kind of horror. She is constantly in mud and nap. Clean only happens in the first minutes after washing under running water. Looking at the promo photos on the Internet, I expected to get a three-hundred-foot brick, but in reality the mod was very convenient to use. In the hand lies like a poured. But that’s how it is too big for a single battery. However, for the sake of security, something must be sacrificed.

On the front side are:
The button “Fire”. The click is distinct, pleasant and not loud. The button itself sits tight and does not stagger.
0.96 “display.It is especially worth noting that in the off state it completely merges with the entire front glossy plastic panel.This is not often found.
The “±” buttons. But their click is heard from another room. Are located somehow very close to each other. Sometimes you can accidentally press both. Also not rattling.

On the back there is supposedly a leather insert with a stitching a la LG G4.

The name of the manufacturer is engraved on the side. Two torx screws hold the metal frame.

The opposite side is completely analogous to the previous one, only here is the engraving of the name of the device.

On top is a solid steel connector with a brass or gold-plated spring-loaded pin. It did not succeed in deforming it with various atoms. Connector platform can accommodate an atomizer, probably of any diameter.

Nearby is a microUSB-port for firmware device. It is covered with a silicone plug and a metal cover, which is fixed with two torx screws. Screwdriver in the set did not come up. Built-in charging is not. Although, with such a hemorrhoids access to the microUSB-port it is there to see it and would not want to.

At the bottom of the box, the battery compartment cover.

To extract it, you need to raise the lamb and, in fact, unscrew it.

On the inside of the lid there is an o-ring.

Threads of high quality. Problems with twisting / unwinding, as it happens in the modes with a similar solution, no.

Inside the compartment, mark the correct location of the battery.

Eats Aegis either from one battery 26650, or from 18650 with the help of a complete adapter.

Geekvape Aegis 100W TC Box Mod
Card Features
Power Rating: 100W
Max. Voltage: 9V ± 0.1V
Operating temperature range: -40 ° C to 80 ° C
Battery discharge up to 3.3V ± 0.1V
Thermal control on nickel, steel, titanium and TCR
Supported resistance range: Power and Bypass – 0.05 – 3 Ω / TC-NI – 0.05 – 0.8 Ω / TC-SS – 0.05 – 1.65 Ω / TC-TI – 0.05 – 1.1 Ω
Temperature range in TC mode: 100 ° C – 300 ° C / 200 ° F – 600 ° F

Earlier I did not encounter boxmodes from Geekvape and the first acquaintance left a positive impression. I did not see any flaws in the quality of the work. According to the manufacturer, the delay is minuscule 0.015 seconds. Whether it triggers autosuggestion, whether the start of the roast is really instant. Unfortunately, the board does not have a wide range of options. Navigation in the menu is convenient. By pressing the “Fire” three times, the modes change, and once – change the parameters. From the third-party settings, only the brightness adjustment of the display is available and the “±” buttons are locked. And about the modes, of which 7, now briefly tell.

Power – varivatt. The screen displays power, battery indicator, resistance, current strength, voltage and number of puffs / time of the last tightening. In the varivatta device without problems copes with the winding of 0.09 Ohm. The resistance of the coil changes only during tightening. On DNA, for example, that in idle time, that at the moment of tightening, the actual resistance of the build is always displayed. You can lock it and reset it, after which the mod will fix the current resistance. Cut-off after 10 seconds.
TC-NI / TC-SS / TC-TI – Thermal control on nickel, steel and titanium. The same settings are available as in the previous mode. You can not adjust the TCR.
TCR – and here already the temperature coefficient is adjusted.
VPC – heating curve. Available 5 divisions in 1 second increments. During tightening, the point on the graph moves in accordance with the previously set power. The transition from one division to another is smooth.
Bypass – Mehmode mode. You can also lock and drop resistance.

Crash test

Geekvape Aegis Box mod, as you already read in the cap, is protected by the standards of MIL STD 810G-516.6 and IP67, which means resistance to short-term immersion in water, protection against ingress of dust into the body and painless drops from a small height without any consequences. The warranty does not cover internal failures due to the user’s fault, so do not disassemble it without special need. The network already has a huge variety of all kinds of bullying over this device. That in liquid nitrogen is dipped, then the machine moves. Honestly, it’s not that much and I want to sway in the trash of the modes, so I will limit myself to water procedures and falls at home.
Let’s start with the test with water. He put it for 20 minutes in the basin. This will be enough to check how it behaves in the rain, when falling in a puddle, a fountain or other not deep accumulations of water. The battery is inside, the device is turned on.

At the end of the bath we observe an unpleasant picture – the water got into the interior, but this did not affect the working capacity. In the battery compartment nothing stranger penetrated.

Analysis of Geekvape Aegis Mod occupation is not simple. The glossy panel is held on a double-sided tape. Fears were in vain – a drop of water accumulated on a protective plastic plate.

Go ahead. This plate is in turn fastened to a silicone sealant. It tore even harder. There are no traces of moisture on the board. It can be concluded that the presence of water under the front panel is not a verdict. The more often in attacks of paranoia will disassemble the mode after immersion in water, the higher the probability of depressurization of the shell.

After that, he dropped a dozen times, imitating the various situations in which this is possible. There are no deformations on the body of the tracks. Yes, laminate is not asphalt, but on the same crash tests from the network of deplorable consequences, too, was not.

Comparison of dimensions and fitting

Snowwolf 200C, Geekvape Aegis, LostVape Therion 166.

IJOY Combro RDTA II, VGOD RDTA RII, SMOK TFV8 Big Baby.

Geekvape Aegis 100W TC Box Mod
Conclusion
Pros:
Protection against falls, dust and water
Quality board
Brutal appearance in the compartment with comfortable ergonomics
Use with batteries 26650 and 18650
The solid connector. It is able to place almost any atoms on itself.

Minuses:
Not the most ideal assembly
Rubber inserts are instantly spoiled
Lack of charging through box-box
Water can still penetrate into the body

In the previous review from greed811 boxmode, after getting moisture, did not turn on. I did not have such a problem. Because we are dealing with the miracle of the Chinese industry and everyone is familiar with their floating manufacturing quality, do not put grandiose hopes that this device will survive 100%. A certain share of the probability of a lamentable outcome is still present. However, despite this, there are simply no alternatives to Aegis. With it, you can go fishing, hunting, dusty plant / garage, camping, and any other place without fear of dropping it into the water, dirt, on the asphalt or trite not to worry about the leaked liquid from the atom. We can only hope that the trend for the protected devices will be picked up by all manufacturers and this will be an integral part of each new product. Rusty is where. For example, to rid the microUSB port of a ton of stubs in the same way as in smartphones.
Thanks to all.

The Geekvape Aegis Mod is provided for writing a review by the store. The review was published in accordance with paragraph 18 of the Site Rules.

Best Seller:
buy electronic cigarette online
ijoy Genie PD270
Nicomore M1
smoant charon ts 218w

Geekvape Aegis Box Mod – The Details You Need To Know

Design & Appearance

The Geekvape Aegis box mod is designed by Justin, Geekvape GM, with the chief designer of Heatvape Invader mini. The Aegis is a tough and legendary TC box mod that has a cylindrical shape with a flat back and curved front thus it cannot roll off the position in which it was kept. It is a very portable product which is coated with leather and zinc alloy materials with a dimension of 8.80 x 4.50 x 3.50 cm and it weighs only 203 grams.

The top of this mod contains the 510 connector and venting holes while the flat back contains the fire button, function buttons, and display screen. This box mod can be comfortably held with your first two fingers, kept in your breast pocket and carried along through any distance as it weighs as much as an average smartphone. This product is currently available in brown and black colours.

Geekvape Aegis Box Mod
Hardware & Performance

The Geekvape Aegis 100W box mod is designed with one of the most advanced chips which feature a real rated power and instantaneous firing (0.015 seconds). It runs up to 100W with single 18650 or 26650 battery. It is the most robust vape mod with MIL STD 810G – 510.6 military grade proof and is robust thus you don’t have to worry about it getting scratched, soiled or broken by accident. The box mod is designed to be waterproof, shockproof and dustproof by adopting an advanced LSR injection molding technology. With IP67 waterproof/dustproof function, you are allowed to carry this device to the beach or go fishing, swimming, boating, kayaking, and any other water park activities. It is able to withstand a dirty environment and can be easily cleaned.

Workability

The Geekvape Aegis 100W box mod is designed to produce a maximum power of 100W, however, it has a power range between 5 – 100W. This product comes with a Temperature Control Function (TCF) which regulates the output temperature between 100 – 300 Deg.C. TCF function does miracles in enhancing e-juice flavor. Temperature control provides the choice of setting how hot you want the coils to be. It comes with a resistance of 0.1 – 3 ohms and a 510 thread.

Strong Recommend:
cheap vape deals
SMOANT Gaia
asvape michael mod
snowwolf vfeng

Kanger IKEN 230W Kit

Kanger IKEN kit has a large power of mod that comes with a built-in 5100 mAh battery and supports max 230W output power. It provides users perfect long-time vaping experience. The mod also featuring a 1.54 inch color TFT screen and show your vaping information directly. It is highly anti-vibrating, low power consuming and can stand with -40° temperature. It also has temperature control (NI/TI/SS/TCR) and DIY curve functions. In order to meet the needs of all vapers, the IKEN is designed with three modes of ability to choose from. You can choose the “Beginner” mode, the “Intermediate” mode or the “Expert” mode. That depends on your skills and knowledge. Each mode has several options that correspond to the selected skill level.

The Kanger Iken is equipped with a hefty 5,100 mAh integrated internal battery. This will allow the mod operate through the course of a day on a single charge, ensuring that you can enjoy your device without the risk of it depleting while you’re on the go. The permanent battery is advantageous, as it eliminates the need to purchase separate external batteries or a battery charger.
Kanger IKEN 230W Kit

The included tank features a top-shelf borosilicate glass tank, which houses the e-juice. It can hold 4ml liquid and has top filling design and “U” airflow technology. Unlike plastic reservoirs, the Kanger Iken is entirely impervious to the acidic composition of e-liquid. This is a very important distinction, as the deterioration of plastic tanks results in tainted flavor and a tarnished appearance, whereas the Kanger Iken will deliver a markedly cleaner, purer, and truer taste, while remaining aesthetically flawless. The glass is encompassed by a stainless steel shell, which helps protect it from accidental drops, while the large window enables you to monitor the remaining e-juice. The “U” airflow technique makes the airflow enters the chamber through two adjustable air inlets at the top, then down and wraps around the sides, forming a “U” shape. Apparently this design produces a more intense taste experience and a massive steam production. A feature further enhanced by the inclusion of a large diameter drip tip.
Kanger IKEN 230W Kit
The Kanger Iken kit is suitable for Beginner, Intermediate and Expert vapers. You will enjoy various and free flavor from this kit. Check out Urvapin so you can get the best deal on Kanger Iken.

Related Recommend:
buy electronic cigarette online
ijoy Genie PD270
Nicomore M1
smoant charon ts 218w

Sigelei Compak F1 40W Kit 2000mAh

The Sigelei Compak F1 Kit, the latest starter kit from Sigelei is a compact device that brings together tough, durable zinc alloy materials and a 2000 mAh battery so you can achieve high performance vaping with lower wattage output.
The Sigelei Compak F1 Kit features a 40W output, a 2ml tank capacity, LED indicators, e-liquid windows and a integrated battery with fast micro USB charging. The chassis is made from zinc alloy and a rubber-oil firing button/grip results in ideal ergonomics. An internal tank has a 2ml e-juice capacity, is easily refilled and its e-liquid level can be monitored via convenient viewing windows. The atomizer/tank are easily removed for replacement and are made with durable materials. There’s also a dust cap stored on the bottom of the kit for cleaning and to ensure maximum hygiene.
This Sigelei Compak F1 Kit is perfectly pocket-sized and an excellent addition to the low powered vaping category.

sigelei compak f1 kit

Features
Elegant design with different color options
Large firing button
Small durable shape with a comfortable feel
Rubber-oil material creates an ideal feel in your hand
Easy to view liquid through the 2 side windows
The atomizer can be easily removed which is very convenient and durable
The dust cap is stored under the device as a hygienic and clean tool

Parameters
Material:Zinc alloy
Wattage range:25W-40W
Working mode: Power mode
Battery capacity: 2000mAh(internal battery)
Resistance: 0.3Ω
Tank capacity:2.0ml
Charging support(USB):5V/2A

Package Included
1 * Compak F1 Mod
1 * Tank
1 * Replacement coil
1 * USB cable
1 * User manual
1 * Warranty card

This Urvapin. You can preorder one.

Best Recommend:
buy electronic cigarette online
ijoy Genie PD270
vapemen steam engine
justfog p16a

85W iStick Pico 25 box mod

The iStick Pico 25 ingeniously packs a big 0.91-inch screen that offers a concise and clear interface, 2A quick charge capability and upgradeable firmware with preheat function in a compact, stylish yet powerful package. Powered by single 18650 battery, the iStick Pico 25 is capable of outputting a maximum power of 85W and can handle various tanks up to 25mm diameter. The ELLO atomizer that features the HW coil for ultimate flavor and retractable top for easy filling pairs with the iStick Pico 25 perfectly in terms of both appearance and performance.
With a compact size, the iStick Pico 25 with ELLO is very comfortable to hold and carry. Powered by single 18650 battery, it is capable of outputting a maximum power of 85W. The iStick Pico 25 features a big 0.91-inch screen that offers concise and clear interfaces. And there are three switchable interfaces for you to choose the one you’re most accustomed to.

The iStick Pico 25 can handle various tanks up to 25mm diameter. With a maximum charging current of 2A, the battery in the iStick Pico 25 can be fully charged much more quickly. The iStick Pico 25 is powered by a single 18650 battery, allowing to always carry spare batteries with you. Preheat function allows the device to quickly heat up the coil at a higher wattage, providing you with a nice vaping experience. And the firmware is upgradeable to be always the latest. The circuit protection system has both software and hardware battery protections of over-charging, over-current and over-discharging. The 18650 battery can be charged in the iStick Pico 25 through the side USB port via wall adapter or computer or charged with an external battery charger.


Eleaf 85W iStick Pico 25 box mod Features & Spec:
Output wattage: 1-85W
Maximum charging current: 2A
Maximum output current: 50A
Thread type: 510 thread
Battery type: high-rate 18650 battery(Continuous discharge current should be above 25A)
Output mode: VW/Bypass/TC(Ni,Ti,SS,TCR-M1,M2,M3) mode
Resistance range: 0.05-1.5ohm (TC modes), 0.1-3.5ohm (VW mode)
Eleaf 85W iStick Pico 25 box mod Package:
1 * iStick Pico 25 (without battery)
1 * QC USB Cable
1 * User Manuals
Spare Parts

Strong Recommend:

cheap vape deals
osub 80w baby
asvape michael mod
snowwolf vfeng